Welcome to Malle London, sign up for special releases, news and events

Thank you for subscribing to our newsletter. You will be hearing from us soon.

Sorry, unfortunately something went wrong. Please try again

Triumph Pannier Rails

Triumph Pannier Rails

Triumph Pannier Rails

£ 79.00

In stock

Our discreet and quick to install black Malle pannier rails are designed to fit all modern, water cooled Triumph Bonnevilles & Scramblers. They simply bolt to the back of the pillion foot rest and to the top of the rear suspension bolt. The perfect accessory to safety and securely fit The Malle Moto Panniers to your motorcycle.

Comes with all necessary fittings and instructions.

Fits:Ā 

The following Triumph models:
T100 / T120 / Street Twin / Street Scrambler / Street Cup, 2005 onwards.

FITTING GUIDE

These rails fit the Triumph T100/T120/Street Twin/Street Cup/Street Scrambler, from 2005 onwards.Ā 

(Will only fit street scrambler left side with stock exhaust fitted and requires longer bolt and spacer on the foot peg on this application only).

1. First remove the top shock absorber fixing bolts – if your motorcycle uses the large diameter type you will need to use the new bolts provided.

2. Then remove the nut holding the silencer/rear foot peg with a 12mm spanner (back of pillion foot peg).

3. Fit the top of the pannier rail (recessed fitting) to the top of the shock absorber and the bottom of the pannier rail (flat attachment) over the foot peg bolt and tighten the foot peg nut.

Tighten the top bolt to 28nm with locktight if possible.

ADJUSTMENT

Check the clearance between the shock spring and the bottom part of the pannier rail. It has to be 10mm at a minimum.

If the rail is touching or the clearance is too small then hold the bottom run of the rail at the rear and at the shock with both hands. Pull firmly until you have the required clearance to the springs.